Size Guide — How to Use Product Measurements

Size Guide: Measure First, Check the Product

Start with a flexible tape, record the measurements that matter for your garment, then compare them with your chosen product’s own chart. This guide explains the method; each product provides its own sizing reference.

Illustrated figure in a long robe with horizontal and vertical reference lines

How to Measure Your Body

The illustration is a visual reference, not a product size chart or a tape-placement diagram. Follow the measuring instructions below. 

Bust: Around the fullest part of your chest, tape level.

Waist: Around your natural waist. Follow a product's specific measuring position if it states one.

Hips: Around the fullest part of your hips and seat.

Height: Standing straight without shoes. Height alone does not establish garment fit or hem position.

Use a flexible tape without pulling it tight. These are general body-measuring suggestions, not proof that any product chart describes body measurements.

Body measuring diagram showing tape positions for bust, natural waist, and hips.
General body-measuring positions: bust, natural waist, and hips. Keep the tape level and resting against the body. These are body measurements, not garment dimensions or an Olive Girl size chart. Use the written steps below and check the measuring method stated for your chosen product.

Make your measurements easy to compare

  1. Wear the underlayers you plan to wear with the outfit. Stand naturally and keep your shoulders relaxed.
  2. Use a flexible tape and a mirror or a helper. Keep the tape level around your bust and hips, resting against the body rather than digging in.
  3. Measure your natural waist without holding your breath. If a listing specifies a different waist position, record that measurement separately.
  4. Repeat each measurement and note the unit. Keep a short record of bust, waist and hips, then add the lengths relevant to your chosen garment. 

For a garment comparison, choose a piece you already enjoy wearing with a similar shape. Compare only measurements taken using the same method as the listing. A comfortable garment can help express your preferred fit; it cannot establish an undocumented sizing convention.

Body, Garment and Flat Measurements Are Different

A body measurement describes the wearer. A garment measurement describes the clothing. A flat width may refer to only one side rather than a full circumference. Follow the specific product's stated convention.

Do not double a value, add an assumed allowance or interpret a range as tested stretch unless the product information supports that interpretation. If the measuring basis is unclear, ask us.

Check Units Before Comparing

One inch equals 2.54 centimeters. Keep the original product measurement and unit as your reference; conversions may introduce rounding. A bare number is not automatically centimeters or inches. Unit conversion does not establish fit or resolve an unclear measuring convention.

Fit Checks by Garment Type

Garment Relevant checks
Dresses and fitted styles Bust, waist, hips and length where provided. Do not choose only by bust when another area is restrictive. Check verified stretch, lining and closure information.
Tops and jackets Bust, shoulders, sleeves and length where provided. Consider your planned layers without assuming the item has room for them.
Skirts and trousers Waist, hips and the stated length. Waist position and rise affect fit; do not infer inseam from total garment length.
Sets and multi-piece outfits Check each included component separately. A single size label does not prove both pieces will fit.

Three ways to make the comparison useful

A dress: Start with the chart’s measuring basis. If the bust points to one size but the waist points to another, keep both measurements in view. Check the hips and length too before deciding; choosing by bust alone leaves the waist question unanswered.

A jacket: Decide what you will wear underneath it. When comparable garment measurements are available, check a jacket you like wearing over that kind of layer, especially across the shoulders and through the sleeves. More bust room alone does not answer a shoulder-fit question.

A coordinated outfit: Compare the top and bottom separately. If one component works and the other does not, first check whether separate sizes can actually be selected. Do not assume a set allows mixed sizing.

Example numbers, not an Olive Girl size recommendation: If a chart explicitly defines a flat underarm width as half the garment’s chest circumference, a 48 cm width represents 96 cm around. That is a garment measurement, not a 96 cm body-size recommendation. Only use this calculation when the listing confirms the measuring method.

Product-Specific Sizing Comes First

If this guide conflicts with explicit sizing information for your chosen product, follow the product-specific information, not this general guide.

This includes the product description, the product's size-chart images and the selected-size measurements in the product page's main purchase area, when those values are explicitly tied to that product and selected option.

Sizing labels and conventions vary by style. This guide explains measuring methods; it is not a universal conversion chart or a fit guarantee.

If two product-specific sources conflict, ask us before ordering. Send both values or screenshots. Do not average them or use a general chart or automatic fit suggestion to settle the difference.

Which Information Should I Use?

Source What to check
Product description and size-chart images Use information for the exact style, color, size, length and component. Verify units and whether figures describe the body or garment.
Measurements for the selected size Use explicit product-specific values for the currently selected size. Tops and Bottoms may have separate data. Do not treat a generic size or weight suggestion as verified garment data.
This general guide Use it for measuring methods and decision support. It must not override product-specific measurements.
Missing or conflicting product data Contact support with the product link, selected option and conflicting values or screenshots before purchasing.

Between Sizes? Do Not Automatically Size Up

Compare all relevant product measurements and your preferred fit. A larger size can change shoulders, neckline, length and proportions as well as circumference. Do not assume every item is stretchy, adjustable or loose-fitting.

If different measurements suggest different sizes, contact us before purchasing. Advice helps you compare available options; it is not a perfect-fit or made-to-measure guarantee.

Height, Hem Length and Alterations

Use the actual product length and its stated measuring point. Your proportions, footwear and where the garment sits affect hem position. A model image or height alone does not establish the hem position on you.

Do not assume every long garment is easy to shorten. Layers, borders, embellishments and construction may limit alterations. Consult a qualified alterations professional before relying on a planned change.

Before You Choose a Size

  1. Select the exact product, color, length and size.
  2. Read its description, size-chart images and product-specific measurements for your selected size.
  3. Confirm the units, measuring basis and relevant component.
  4. Compare all relevant measurements, not just your usual letter size.
  5. Ask about missing or conflicting data before ordering.

For returns after delivery, consult the Return and Refund Policy for the window, conditions and shipping responsibilities. This guide does not replace that policy.

Need Help With a Specific Product?

Email the product link, selected color and size, your relevant measurements with units, and the detail you need clarified. Include both values or screenshots if product information conflicts.

support@olivegirlstore.com

We can help review the available information; a general guide cannot guarantee fit.

For occasion, silhouette and coverage checks, use our Clothing buying guide.